top of page
Ka Band Transceiver
TXVR-2
1/3
Description
The new TXVR-2 is a high performance Ka-Band transceiver with unprecedented versatility. The product includes the complete antenna feed chain with polarizer, a wide-band PLL LNB and an OpenBMIP Monitoring and Control facility – all in a single, IP67 rated, enclosure. The unit is convection cooled (fan-less) to ensure best reliability. The DRC has the capability to operate over commercial and military Ka-Band frequencies by electronic sub-band switching. It also features electronic polarization switching between RHCP/LHCP as well as co-polar and cross-polar modes.
All this versatility allows the DRC to switch between any satellite without changing hardware. Standard L-Band RX-IF and TX-IFL interfaces match common VSAT modems. All production units are 100 % RF tested under environmental extremes.
Main Features
a. 34dBm Output Power
b. Very Small Size & Mass [1.8KG]
c. Optional Internal Reference Source [PLL]
d. High Frequency Stability
e. Low DC Power Consumption: 35W
f. Reliable All - Weather Performance
2.5W Specifications
Parameter
RF Band: 29.25 to 30 GHz
IF Band: 1.55 to 2.3 GHz
Output Power P-1: 33dBm min
Gain: 55dB Typ., 52dB Min
IMD3: ≤-26dBc (@Linear power point)
Spurious: ≤-50 dBc
Gain Flatness: ±1dB@36MHz, ±2dB@P-P
Phase Noise:
≤-60 dBc/Hz@ 100Hz
≤-70 dBc/Hz@ 1kHz
≤-80 dBc/Hz@ 10kHz
≤-90 dBc/Hz@ 100kHz
IF Interface: F
RF Interface: 11.3mm WG, Non-Grooved
Input V.S.W.R.: ≤2:1
Output V.S.W.R.: ≤2:1
Power Consumption: 15 to 50VDC, 28W@33dBm
4.0W Specifications
Parameter
RF Band: 18.92 to 20.2 GHz
IF Band: 0.92 to 2.2 GHz
Noise Factor: <1.8dB(Normal temerature)
Gain: 57dB (Min), 54dB (Max)
IF Output P-1: ≥5 dBm
Image Rejection: ≤-50 dB
Gain Flatness: ±2.5@P-P
Phase Noise:
≤-60 dBc/Hz@ 100Hz
≤-70 dBc/Hz@ 1kHz
≤-80 dBc/Hz@ 10kHz
≤-90 dBc/Hz@ 100kHz
IF Interface: F
RF Interface: 11.3mm WG, Non-Grooved
Input V.S.W.R.: ≤2:1
Output V.S.W.R.: ≤2:1
Mechanical Diagram
bottom of page